+7 (495) 795-09-30
   


Внимание!

В настоящее время поставки осуществляются партиями от 10 единиц каждой модели по 100% предоплате. Дополнительные условия обговариваются отдельно. Новые правила обусловлены запретом на поставку оборудования спутниковой связи в Российскую Федерацию.

* Учитывая интересы наших клиентов, минимальная партия может быть сформирована от нескольких заказчиков.

Основные особенности:

  • Up to 8 L-band inputs

  • Each input is switchable and gain adjustable

  • Optional upconversion to C, Ku or DBS-band

  • Optional 10 MHz +DC power for BUC

  • Optional 10 MHz reference input/output

  • Advanced monitoring and control

The FRC0750 can also be used as an active switching device for signal routing purposes or redundancy switching operations. In its default configuration, the FRC0750 combines up to 4 different L-band signals into one L-band signal. As an option it is possible to combine up to 8 different L-band signals within the same unit.

A DC power supply and a reference frequency are also available on the L-band output, providing a compact and cost effective solution when the FRC0750 is used in combination with an outdoor RF upconverter and/or amplifier.

The FRC0750 can be delivered with an integrated block upconverter as option. In this configuration, the FRC0750 converts the L-band output signal of the combiner to C, Ku or DBS-band. The FRC0750 is easy to operate and monitor. All control and monitoring parameters are available locally on the front panel and remotely through a web interface. It is also possible to control or monitor the FRC0750 via Newtec’s proprietary RMCP protocol or via SNMP.

Материалы

FRC0750 Active L-Band Combiner and Upconverter